Additional protective gear such as safety goggles is also advised. It can then be thrown away with normal household trash.ĭISCLAIMER: A respirator MUST be worn when using epoxy paint. The best way to dispose of epoxy paint is to leave it in an open paint can and let it dry out until it becomes a solid. Epoxy paint cannot be stored once the two parts are mixed, and any leftover must be disposed of properly. When using epoxy paint, only mix enough of the two parts of the product to be used immediately. Since epoxy paint is sold as two disparate, stable ingredients that are then mixed into a temporarily usable paint, preparation is needed at this stage as well since once mixed the paint should be used immediately. Step 4 - Preparing the Epoxy PaintĪ tough, strong surface like concrete is best covered with a specialized variety such as a coat of epoxy paint. Scrape-away the dried spots with a bristled brush and sweep up the chips with a broom. Give the paste time to dry until it hardens into a thin crust. Apply this paste on all the visible spots. Mix the contents using a plastic spatula until it develops a paste-like consistency.
Prepare a solution of denatured alcohol and hydrated lime in equal proportions. After the buffing, the curing compounds are revealed in the form of small spots below the old paint. Inspect the dried concrete surface for curing compounds. While models will vary, be safe and follow all instructions that accompany your device. DISCLAIMER: A floor buffer is a fast-moving, high-powered machine.
0 kommentar(er)
